DC logger for traction AT stations
In the Netherlands, two different traction energy supply systems are in use on mainline railways. The standard supply voltage for railway lines is 1500 Vdc.…
Tag: power
DC logger for AC supplied trains
In the Netherlands, two different traction energy supply systems are in use on mainline railways. The standard supply voltage for railway lines is 1500 Vdc.…
Battery Monitoring System
Battery energy storage in distribution networks is rapidly gaining importance, in order to balance rapidly varying distributed generation like photovoltaic systems.EMPEQ’s battery monitoring system (BMS)…
Inverter – 4 x 100 kVA – for utility battery storage
These inverters have been supplied to the Dutch distribution network operator Enexis, for their R&D project Smart Storage. The storage system will be installed in…
Inverter – 2 x 200 kVA – for utility battery storage
These inverters have been developed for the microgrid Bronsbergen in Zutphen, the Netherlands. The microgrid was originally created in as a full-scale test site within…
Peak shaving system – 15 kVA, 10 kWh
EMPEQ supplied a complete storage system for peak shaving at the end of a long distribution cable. The cable feeds a number of homes and…
Fault Current Source
Many inverter-supplied networks have a relatively low fault level, caused by the fact that most commercial inverters cannot supply more than 120% of their rated…
Power Quality Optimizer
The Power Quality Optimizer (PQO) is an electronic device ensuring a stable voltage in rural low-voltage networks. For historical reasons, low voltage distribution networks in…
Inverter Control Board
All inverters produced by EMPEQ are based on the same architecture and use the same control hardware. This is built around a microcontroller from the…
Power Supply Board
This power supply board is used whenever a black start capability of an inverter is appreciated. It takes power directly from the battery and converts…
DC logger for AC supplied trains
In the Netherlands, two different traction energy supply systems are in use on mainline railways. The standard supply voltage for railway lines is 1500 Vdc.…
Battery Monitoring System
Battery energy storage in distribution networks is rapidly gaining importance, in order to balance rapidly varying distributed generation like photovoltaic systems.EMPEQ’s battery monitoring system (BMS)…
Inverter – 4 x 100 kVA – for utility battery storage
These inverters have been supplied to the Dutch distribution network operator Enexis, for their R&D project Smart Storage. The storage system will be installed in…
Inverter – 2 x 200 kVA – for utility battery storage
These inverters have been developed for the microgrid Bronsbergen in Zutphen, the Netherlands. The microgrid was originally created in as a full-scale test site within…
Peak shaving system – 15 kVA, 10 kWh
EMPEQ supplied a complete storage system for peak shaving at the end of a long distribution cable. The cable feeds a number of homes and…
Fault Current Source
Many inverter-supplied networks have a relatively low fault level, caused by the fact that most commercial inverters cannot supply more than 120% of their rated…
Power Quality Optimizer
The Power Quality Optimizer (PQO) is an electronic device ensuring a stable voltage in rural low-voltage networks. For historical reasons, low voltage distribution networks in…
Inverter Control Board
All inverters produced by EMPEQ are based on the same architecture and use the same control hardware. This is built around a microcontroller from the…
Power Supply Board
This power supply board is used whenever a black start capability of an inverter is appreciated. It takes power directly from the battery and converts…